5600 Series
The 5600 Series showcases the latest rubber technology. With a 3” pump size, this product’s weight with flanges is approximately 142 lbs. The 5600 Series is perfect for a variety of applications, such as molasses feeds, fertilizers, and paper pulps.
- Reversible Rotation & Flow
- Ability to Pass Small-Size Solids
- External Greasing
- Rubber Gear Construction
Standard Construction Materials
- Cast iron housings
- Gears are Buna coated cast iron
- Bronze bearings
- Graphite packing
- External greased bearings
Configuration Options
- Direct couple hydraulic motor drive bracket (SAE A or B)
- Triple-lip seal
- Chrome plated wear plates
- Stainless steel shafts
- Bi-Directional relief valve
- Iron Bushings
Typical Applications
- Fertilizers
- Paper pulps
- Waste oils, tallow, etc.
- Sealant coating
- Oil field service
- Brine & raw water
- Sludge & slurry
- Molasses feeds
5600 Series
For your high solid and heavy liquid transfer duties, the 5600 Series offers extreme service.
5600 Series Nomenclature
The Model Number consists of a several digit number.The first digit (5) indicates the series. The second digit (6) indicates the shaft sealing.
- 5 = Triple Lip Seal
- 6 = Packing Rings
The third and fourth digits (58) indicate the approximate theoretical displacement in U.S. gallons per 100 revolutions.
- 58GPM [219.6 Liters] = .58GPR x 100RPM
The fifth and sometime sixth digits (BH) indicates the pump head arrangement.
- H = Pump with inboard bushing (Shaft Sealing: Packing Rings Only)
- BH = Pump with mounting provisions for SAE hydraulic motor (Shaft Sealing: Packing & Triple Lip Seal)
The seventh digit (F) indicates port style.
- F = Pump with Roper standard flange ports
The eighth and ninth digits (BV) indicate the type of faceplate on the pump.
- No letters = plain faceplate
- BV = bi-directional relief valve faceplate
The letter(s) (LW) indicates shaft position.
- No letter = High drive, Clockwise Rotation (W rotation is standard)
- LW = Low drive, Clockwise Rotation
- Z = High Drive, Counter-Clockwise Rotation
- LZ = Low Drive, Counter-Clockwise Rotation
Occasionally, special pumps or configurations are required which are unique for a particular application. These modifications are clarified by a SPECification number. Identification of any items different than a standard pump can be made by consulting Roper Pump Company or an authorized distributor.
The TYPE number is a number used by Roper Pump Company for in-house identification of construction. Always include the type number in any references to the pump.
- A = low pressure spring (standard)
- B = high pressure spring
The SERIAL number is a unique number assigned to each pump built by Roper Pump Company
In any communication concerning this pump, always be sure to include the Figure, Spec, Serial, and Type numbers so proper identification of the pump can be assured.
Rebuild Kits
Major rebuild kits available for standard pumps. See distributor or manufacturer for more details.
5600 Series - Size & Specification Chart
*Hydraulic mounting and bi-directional RV options available.
Note: Maximum speed and flow can only be achievable under the correct inlet (suction) and liquid conditions. Liquid viscosity and discharge pressure, plus pumping conditions will determine actual flow (ie. – theoretical minus slip).
5600 Pump Series Documents
Questions?
5658HF-1
5658BHF-1
5658HF-5788-1
5658HFLW-1
5658HFLW-17699-1
5658HFLZ-1
5658BHFBV-1A
5658BHF-17833-1
5658HF-17879-1
5658HFZ-1
5658HFBV-1A
5658HFBV-16242-1A
5658HFLW-7190-1
5658HFLW-5788-1
5658HFZ-17647-1
5658HF-17647-1
5658BHFBV-3348-1A
5658HF-17878-1
5658HF-16666-1
5658BHF-5788-1
5658BHF-3348-1
5558BHF-1
