2835 series gear pumps are known for their robust design, precision engineering, and exceptional performance. These pumps are used in a wide range of industrial applications, including chemical processing, petroleum refining, and power generation. While these pumps are known for their durability and reliability, they may experience common issues that can impact their performance.
In this blog post, we will discuss some of the most common issues that may arise with 2835 series gear pumps and provide tips and tricks for troubleshooting them.
Low flow rate: If you notice a decrease in the flow rate of your 2835 series gear pump, it may be due to a clogged filter or a worn-out gear. To troubleshoot this issue, check the filter and clean or replace it if necessary. Also, inspect the gears for signs of wear and replace them if needed.
Leakage: Leakage is a common issue that can occur in gear pumps due to worn-out seals, damaged shafts, or loose fittings. To troubleshoot this issue, inspect the seals and replace them if needed. Tighten the fittings and check the shaft for any damage. If the shaft is damaged, replace it.
Noisy operation: If your 2835 series gear pump is making unusual noise during operation, it may be due to worn-out bearings or gears. To troubleshoot this issue, inspect the bearings and gears for signs of wear and replace them if needed. Also, check for misalignment of the pump and motor, and adjust it if necessary.
Overheating: Overheating can occur in gear pumps due to high viscosity fluids or inadequate lubrication. To troubleshoot this issue, check the viscosity of the fluid and make sure it is within the recommended range. Also, ensure that the pump is adequately lubricated and adjust the flow rate if needed.
Cavitation: Cavitation occurs when the fluid pressure drops below the vapor pressure, causing bubbles to form and collapse, resulting in damage to the pump. To troubleshoot this issue, inspect the pump for any blockages that may be causing the pressure drop. Also, check the fluid level and ensure that it is within the recommended range.
Regular maintenance and troubleshooting are essential for ensuring the optimal performance and longevity of 2835 series gear pumps. By following the tips and tricks mentioned above, you can troubleshoot common issues and prevent any potential problems from affecting your pump’s performance.
